Stays

Flights

Cars

Packages

My Trips

Data Sharing and Security Addendum

This Data Sharing and Security Addendum, inclusive of Appendices 1, 2 and 3 hereto, (“Addendum”) sets out the essential terms governing the sharing of Personal Data between by Hopper (USA), Inc., a Delaware corporation with its principal place of business located at 265 Franklin Street, Suite 1702, Boston, MA 02110 USA and/or its affiliates (meaning any other entity directly or indirectly controlling or controlled by, or under direct or indirect common control with Hopper (USA), Inc., including without limitation Hopper, Inc., a Canadian federal Corporation with a principal place of business at 5795 Avenue de Gaspe, Montreal, Quebec, H2S 2X3, Canada and Hopper Travel (Ireland), Ltd., a Ireland Corporation with a principal place of business at Mespil Business Centre, Mespil House, Sussex Road, Dublin 4, Hopper UK Inc., Ltd., a limited liability company incorporated under laws of England and Wales with a principal place of business at 58-60 Kensington Church St., Kensington, London W8 4DB, United Kingdom (collectively “Hopper”)) and Hopper’s business partners, service providers and vendors (“Partner” and together with Hopper, the “Parties”). This Addendum shall be deemed incorporated into the terms and conditions of any agreement (each, an “Agreement”) between Hopper and Partner to which it is attached, whether entered into before or after the date of execution hereof.  In the event of any conflict between any term of any Agreement and this Addendum, the terms of this Addendum shall govern and prevail. 

  1. Definitions.

“Adequacy Decision” means a country, territory or sector within a country which has been subject to a decision, and continues to be subject to such decision for the duration of the Agreement, or ensuring an adequate level of protection of Personal Data under the GDPR or UK GDPR as applicable to the Personal Data processing activity.

“Approved Standard Contractual Clauses” mean: (i) the Model EU Third Country Clauses; or (ii) the UK Approved Addendum, as applicable.

“Controller” means an entity that determines the purposes and means of Processing Personal Data. In the event such term (or a similar term addressing similar functions) is already defined in applicable Data Protection Laws, then “Controller”, as used herein, shall have the meaning provided in such applicable Data Protection Law, including the meaning of a “Business”, as applicable, as defined in the California Consumer Privacy Act of 2018.

“Data Protection Laws” means any data protection laws, regulations, directives, regulatory requirements, and codes of practice applicable to the provision of the Services under an Agreement, including any amendments thereto and any associated regulations or instruments (e.g., which may include, without limitation, the General Data Protection Regulation (EU) 2016/679 (“GDPR”) and GDPR as it forms part of the laws of England and Wales, Scotland and Northern Ireland by virtue of section 3 of the European Union (Withdrawal) Act 2018 and as amended by the Data Protection, Privacy and Electronic Communication (Amendments etc) (EU Exit) Regulation 2019 and 2020 respectively and any legislation in force in the United Kingdom from time to time that subsequently amends or replaces them (“UK GDPR”).

“Hopper Data” means any data that is provided by Hopper to Partner, directly or indirectly (including through the Service) or otherwise collected, accessed or processed by Partner on behalf of Hopper, about Hopper, the Hopper apps websites and services, any Hopper consumer, end user, employee, partner, vendor or other provider, or the use of any services by any of them, including any Personal Data. 

“Model EU Third Country Clauses” mean the Standard Contractual Clauses for the Transfer of Personal Data to Third Countries pursuant to Regulation (EU) 2016/679 of the European Parliament and of the Council, as amended pursuant to the European Commission Implementing Decision (EU) 2021/914 of 4 June 2021.

“Partner Data” means any data that is provided by Partner to Hopper, directly or indirectly (including through the Service) or otherwise collected, accessed or processed by Hopper on behalf of Partner, about Partner, the Partner apps websites and services, any Partner consumer, end user, employee, partner, vendor or other provider, or the use of any services by any of them, including any Personal Data.

“Personal Data” means any information that can be used to identify, locate, or contact an individual including: (i) first and last name; (ii) home or other physical address; (iii) telephone number; (iv) email address or online identifier associated with an individual; (v) social security number, passport number, driver’s license number, or similar identifier; (vi) credit or debit card number; (vii) employment, financial or health information; (viii) IP address or device identifier, or (ix) any other information relating to an individual, including cookie information and usage and traffic data or profiles, that is combined with any of the foregoing.

“Process” or “Processed” or “Processing” means any operation or set of operations performed upon Personal Data, including collection, recording, retention, sharing, organization, storage, access, adaptation, alteration, retrieval, consultation, use, disclosure, dissemination, making available, alignment, combination, blocking, deleting, erasure, or destruction.

“Restricted Transfer” means a transfer of Personal Data to a country or territory or specified sector within a country that: (i) is not subject to Adequacy Decision; or (ii) is not subject to any derogations that would permit the transfer of the Personal Data to the country, territory or sector in accordance with the GDPR or the UK GDPR (as applicable to the Personal Data transfer).

“Service” means the services contemplated by an Agreement.

“UK Approved Addendum” means the template addendum issued by the UK’s Information Commissioner’s Office and laid before UK Parliament in accordance with section 119A of the UK Data Protection Act 2018 on 2 February 2022, as it is revised under section 18 of the Mandatory Clauses from time to time. Where the template addendum is referred to in the definition, it means the document entitled: International Data Transfer Addendum to the EU Commission Standard Contractual, version B1.0, in force 21 March, 2022.

2. The Parties as Controllers.

a. Partner shall comply with the requirements of the Data Protection Laws applicable to Controllers with respect to the use of Hopper Data herein (including, without limitation, by implementing and maintaining at all times all appropriate security measures in relation to the Processing of Hopper Data) and shall not knowingly do anything or knowingly permit anything to be done with respect to the Hopper Data which might lead to a breach by Hopper of the Data Protection Laws. 

b. Hopper shall comply with the requirements of the Data Protection Laws applicable to Controllers with respect to the use of Partner Data herein (including, without limitation, by implementing and maintaining at all times all appropriate security measures in relation to the Processing of Partner Data) and shall not knowingly do anything or knowingly permit anything to be done with respect to the Partner Data which might lead to a breach by Partner of the Data Protection Laws. 

c. The Parties shall Process Personal Data in accordance with the description of the Processing set forth in Appendix 1 to this Addendum.

d. Each Party shall only transfer Hopper Data or Partner Data, as applicable, to third parties, processors or affiliates who shall sign written agreements which contain terms for the protection of Hopper Data or Partner Data, as applicable, which are no less protective than the terms set out in this Addendum. 

e. The Parties agree to cooperate with each other to the extent reasonably necessary to enable the other Party to adequately discharge its responsibility as an independent Controller under the Data Protection Laws.

3. Use of Personal Data. 

a. The Parties acknowledge and agree that when Personal Data is shared between the Parties pursuant to the Agreement, Partner and Hopper are each independent Controllers with respect to all Hopper Data Processed in connection with the Services. The Parties further acknowledge and agree that when Hopper provides Services to Partner pursuant to an Agreement, Hopper and Partner are each Independent Controllers with respect to all Partner Data in connection with the Services. As such, each Party independently determines the purpose and the means of the Processing of such Hopper Data or Partner Data, as applicable, and is not a joint Controller with the other Party with respect to such Hopper Data or Partner Data, as applicable. 

b. The Parties acknowledge and agree that each Party is permitted to use, reproduce, and Process Hopper Data or Partner Data, as applicable, only for the following limited purposes:

(i) as reasonably necessary to provide and improve the Services;

(ii) to monitor, prevent, and detect fraud, and to prevent harm to Hopper, Partner, and to third parties;

(iii) to comply with legal or regulatory obligations applicable to the Processing and retention of data to which the Party is subject, including applicable anti-money laundering and identity verification obligations;

(iv) to analyze, develop, and improve a Party’s products and services;

(v) internal usage, including but not limited to, data analytics and metrics;

(vi) to compile and disclose Hopper Data or Partner Data, as applicable, in the aggregate in anonymized form where no individual or user Hopper Data or Partner Data, applicable, is identifiable; and

(vii) complying with applicable legal requirements and assisting law enforcement agencies by responding to requests for the disclosure of information in accordance with applicable law.

c. Notwithstanding anything to the contrary contained in the Agreement or in this Addendum, except as expressly permitted in writing by the other Party, including as expressly set forth in an Agreement, neither Party shall be permitted to sell Hopper Data or Partner Data, as applicable, to any third party or to use the Hopper Data or Partner Data, as applicable, for marketing purposes.

d. A Party will notify the other Party in writing immediately upon making a determination that it has not met, or can no longer meet, its obligations under this Section 3 of this Addendum, and, in such case, will abide by the other Party’s written instructions, including instructions to cease further processing of Personal Data, and take any necessary steps to remediate any processing of such Personal Data not in accordance with this Section 3 of this Addendum.

4. International Transfers of Personal Data. 

a. The Model EU Third Country Clauses - Module One shall apply to the transfer of Personal Data from a Party acting as a Controller to another Party acting as a Controller where the transfer of Personal Data is a Restricted Transfer to which the GDPR applies.

b. The UK Approved Addendum shall apply to the transfer of Personal Data from a Party acting as a Controller to another Party acting as a Controller where the transfer of Personal Data is a Restricted Transfer to which the UK GDPR applies.

c. The Parties agree that: (i) the Model EU Third Country Clauses - Module One and the UK Approved Addendum are incorporated by reference into this Addendum without further need for incorporation or attachment; and (ii) by executing this Addendum they are deemed to have executed the the Model EU Third Country Clauses - Module One and the UK Approved Addendum as applicable to the relevant Personal Data transfer.

d. The information required for the purposes of the Model EU Third Country Clauses - Module One and the UK Approved Addendum is provided in Appendix 3.

e. To the extent that a Party to this Agreement that is established in the UK or EEA transfers personal data to another Party established in the United States and the processing of all such Personal Data is covered by the receiving Party’s Data Privacy Framework certification, the requirements of Clauses 4(a)-4(d) shall not apply and instead the Party responsible for the Processing of Personal Data in the United States agrees to maintain such Data Privacy Framework certification through the term of the transfer and to notify the other Party if it ceases to maintain, or anticipates revocation or withdrawal, or is otherwise challenged by any supervisory authority as to the status of, or make determination itself that is can no longer meet the obligations under Data Privacy Framework.

f. In the event that the European Commission decisions or other valid adequacy methods under  Applicable Data Protection Law authorizing the data transfer mechanism referred to in Clause 4(e) are held to be invalid, Approved Standard Contractual Clauses shall apply, in accordance with Clauses 4(a)-4(d).

5. Security. 

a. Each Party has implemented, and will maintain, a comprehensive written information security program (“Information Security Program”) that includes administrative, technical, operational, organizational, and physical safeguards to ensure the confidentiality, security, integrity, and availability of Personal Data and to protect against unauthorized access, use, disclosure, or access, and against unlawful or accidental alteration, loss, or destruction of the Personal Data. In particular, the Information Security Program shall include, but not be limited to, the technical and organizational safeguards where appropriate or necessary to ensure the protection of the Personal Data as set forth in Appendix 2.

b. Each Party will notify the other Party immediately in writing upon discovery of any suspected or actual breach of or compromise or unauthorized access to any Partner Data or Hopper Data, as applicable (each, a “Security Incident”). The notice will describe the Security Incident, the status of the Party’s investigation, and, if applicable, the potential number of persons affected. The Parties shall cooperate fully in the investigation of any Security Incident.

6. Term and Termination; Obligations Upon Termination. 

a. This Addendum shall remain in full force and effect for until the latter of (i) the Agreement(s) remains in effect, (ii) Partner retains copies of the  Hopper Data or (iii) Hopper retains copies of the Partner Data.

b. A Party may terminate this Addendum and/or Agreement immediately, without judicial notice or resolution and without prejudice to any other remedies, in the event that (i) the other Party is in substantial breach of any representations or warranties given under this Addendum, and fails to cure such breach within 30 days' notice from the non-breaching Party, (iii) a data protection or other regulatory authority or other tribunal or court in the countries in which a Party or its affiliate entities operates finds that there has been a breach of any relevant law in that jurisdiction by virtue of the Partner’s or Hopper's processing of Personal Data, (iv) compliance with the terms of this Addendum by Hopper or Partner, as applicable, would put Hopper or Partner in breach of its legal obligations; or (v) if either party makes an assignment for the benefit of creditors, becomes subject to a bankruptcy proceeding, is subject to the appointment of a receiver, or admits in writing its inability to pay its debts as they become due. 

c. Upon termination of this Addendum for any reason, each Party shall, and shall cause any and all subcontractors to, immediately at the other Party 's request: (i) return all Partner Data or Hopper Data, as applicable, and all copies of such data subject to this Addendum to the other party; or (ii) destroy all copies of such data in a secure manner that is reasonably designed to render the information permanently unreadable and not reconstructable into a usable format (i.e., in accordance with the then-current U.S. Department of Defense, or similar data destruction standard or CESG standards, as applicable). 

7. Governing Law. This Addendum will be governed by and construed in accordance with the governing law designated in the Agreement into which it is incorporated. The governing law of the Approved Standard Contractual Clauses is specified in Appendix 3 to this Addendum. 

APPENDIX 1 (Hopper Data Sharing and Security Addendum)

  1. Subject Matter and Purpose

The subject matter of the data processing under this Addendum is Processing of Personal Data for following purposes: 

  • To facilitate the performance of the Services provided by data importer to data exporter in accordance with the Agreement

  • To comply with laws applicable to the Parties

  • As set forth in the Addendum

2. Duration

The duration of the Agreement.

3. Nature of Processing

The data processing will involve any such processing that is necessary for the purposes set out in the Agreement and this Addendum (as applicable).

4. The frequency of the transfer (e.g. whether the data is transferred on a one-off or continuous basis)

As set forth in the Agreement.

5. The period for which the personal data will be retained, or, if that is not possible, the criteria used to determine that period 

Personal Data is retained only for as long as is necessary with regard to the relevant purpose(s) it was collected for, as specified above. To determine the appropriate retention period for personal data following criteria are considered: the amount, nature and sensitivity of the Personal Data, the potential risk of harm from unauthorized use or disclosure of the Personal Data, the purposes for which the Personal Data is processed and whether such purposes can be achieved through other means, and the applicable legal, regulatory, tax, accounting or other requirements.

6. Type of Personal Data

The types of Personal Data processed are as described in the Agreement (as amended from time to time) and this Addendum, and below (as applicable).

7. Categories of Data Subjects

The categories of Data Subjects are as described in the Agreement (as amended from time to time) and this Addendum (as applicable).

8. Sensitive Data

None.

APPENDIX 2 - Technical and Organizational Safeguards (Hopper Data Sharing and Security Addendum)

  1. Access Controls. Policies, procedures, and physical and technical controls: (i) to limit physical access to its information systems, data processing equipment, data processing systems, and the facility or facilities in which they are housed to properly authorized persons; (ii) to ensure that all members of its workforce who require access to the Personal Data have appropriately controlled access and will maintain the confidentiality of the Personal Data, and to prevent those workforce members and others who should not have access from obtaining access; (iii) to authenticate and permit access only to authorized individuals and to prevent members of its workforce from providing the Personal Data or information relating thereto to unauthorized individuals; (iv) to encrypt and decrypt the Personal Data where appropriate; (v) to provide for the use of pseudonymisation where appropriate; and (vi) to ensure that data collected for different purposes can be processed separately.

  2. Security Awareness and Training. A security awareness and training program for all members of Provider’s workforce (including management) who have access to the Personal Data, which includes training on how to implement and comply with its Information Security Program.

  3. Security Incident Procedures. Policies and procedures to detect, respond to, and otherwise address Security Incidents (as defined herein), including procedures to monitor systems and to detect actual and attempted attacks on or intrusions into the Personal Data or information systems relating thereto, and procedures to identify and respond to suspected or known security or privacy incidents, mitigate harmful effects of such incidents, and document such incidents and their outcomes.

  4. Contingency Planning. Policies and procedures for responding to an emergency or other occurrence (for example, fire, vandalism, system failure, and natural disaster) that damages the Personal Data or systems that contain the  Personal Data, including a data backup plan, a Business Continuity Plan (BCP) and a disaster recovery plan, including measures to ensure the ongoing confidentiality, integrity, availability and resilience of Provider systems and services,  and to ensure the ability to restore the availability and access to the Personal Data in a timely manner in the event of a physical or technical incident.

  5. Device and Media Controls. Policies and procedures that govern the receipt and removal of hardware and electronic media that contain the Personal Data into and out of a Provider facility, and the movement of these items within a Provider facility, including policies and procedures to address the final disposition of the Personal Data, and/or the hardware or electronic media on which it is stored, and procedures for removal of Personal Data from electronic media before the media are made available for reuse.

  6. Audit Controls. Hardware, software, and/or procedural mechanisms that record and examine activity in information systems that contain or use electronic information, including appropriate logs and reports concerning these security requirements and compliance therewith, and measures to ensure that it is possible to check and establish whether and by whom data have been input into data processing systems or removed.

  7. Data Integrity. Policies and procedures to ensure the confidentiality, integrity, and availability of the Personal Data and protect it from disclosure, improper alteration, or destruction.

  8. Storage and Transmission Security. Technical security measures to guard against unauthorized access to the  Personal Data that is being transmitted over an electronic communications network, including a mechanism to encrypt Personal Data in electronic form while in transit and at rest in storage on networks or systems to which unauthorized individuals may have access, and to ensure that it is possible to check and establish to which bodies the transfer of Data by means of data transmission facilities is envisaged.

  9. Storage Media. Policies and procedures to ensure that prior to any storage media containing  Personal Data being assigned, allocated or reallocated to another user, or prior to such storage media being permanently removed from a facility, Provider will irreversibly delete such Personal Data from both a physical and logical perspective, such that the media contains no residual data, or if necessary physically destroy such storage media such that it is impossible to recover any portion of data on the media that was destroyed. Provider shall maintain an auditable program implementing the disposal and destruction requirements set forth in this Section for all storage media containing Personal Data.

  10. Assigned Security Responsibility. Provider shall designate a security official responsible for the development, implementation, and maintenance of its Information Security Program. Provider shall inform Provider as to the person responsible for security.

  11. Testing.  The Party shall regularly test, assess, and evaluate the key controls, systems and procedures of its Information Security Program to ensure that they are properly implemented and effective in addressing the threats and risks identified and protecting the Personal Data. Tests should be conducted or reviewed by independent third parties or staff independent of those that develop or maintain the security programs.

  12. Adjust the Program. The Party shall monitor, evaluate, and adjust, as appropriate, the Information Security Program in light of any relevant changes in technology or industry security standards, the sensitivity of the Personal Data, internal or external threats to Provider or the Personal Data, and Provider’s own changing business arrangements, such as mergers and acquisitions, alliances and joint ventures, outsourcing arrangements, and changes to information systems.

APPENDIX 3 - Information required for the Approved Standard Contractual Clauses (Hopper Data Sharing and Security Addendum)

  1. Information Required for the EU Model Third Countries Clauses

Clause reference in EU Standard Clauses

Option selected

Clause 7 - Docking clause (optional)

This option is not selected. 

Clause 11

Optional language in Clause 11(a) is not selected.

Clause 17 - Governing law

These Clauses shall be governed by the law of the Republic of Ireland.

Clause 18 - Choice of forum and jurisdiction

The Parties agree that those shall be the courts of the Republic of Ireland.

Annex 1A - List of parties

Data exporter(s): 

Names and addresses: Hopper Travel (Ireland), Ltd. an Ireland Corporation with a principal place of business at Mespil Business Centre, Mespil House, Sussex Road, Dublin 4; and Hopper, Inc., a Canadian federal Corporation with a principal place of business at 5795 Avenue de Gaspe, Montreal, Quebec, H2S 2X3, Canada

Contact person’s name, position and contact details: Adriana Sokólska, Data Protection Officer, legal@hopper.com

Activities relevant to the data transferred under these Clauses: See Appendix 1

Signature and date:  Signature and date can be found in the signatory page of the Agreement.

Role (controller/processor): Joint controllers

and

Name: as set forth in the Agreement

Address: as set forth in the Agreement

Contact person’s name, position and contact details: as set forth in the Agreement

Activities relevant to the data transferred under these Clauses: See Appendix 1

Signature and date:  Signature and date can be found in the signatory page of the Agreement.

Role (controller/processor): Controller

Data importer(s): 

Names and addresses: Hopper Travel (Ireland), Ltd. an Ireland Corporation with a principal place of business at Mespil Business Centre, Mespil House, Sussex Road, Dublin 4; and Hopper, Inc., a Canadian federal Corporation with a principal place of business at 5795 Avenue de Gaspe, Montreal, Quebec, H2S 2X3, Canada

Contact person’s name, position and contact details: Adriana Sokólska, Data Protection Officer, legal@hopper.com

Activities relevant to the data transferred under these Clauses: See Appendix 1

Signature and date:  Signature and date can be found in the signatory page of the Agreement.

Role (controller/processor): Joint controllers

and

Name: as set forth in the Agreement

Address: as set forth in the Agreement

Contact person’s name, position and contact details: as set forth in the Agreement

Activities relevant to the data transferred under these Clauses: See Appendix 1

Signature and date:  Signature and date can be found in the signatory page of the Agreement.

Role (controller/processor): Controller

Annex 1B - Description of transfer

This information can be found in Appendix 1 to this Addendum.

To the extent applicable, the descriptions of safeguards applied to special categories of data can be found in Appendix 2 to this Addendum.

For transfers to sub-processors, details on the subject matter, natures and duration of the processing shall be contained in the agreed list of Sub-processors

Clause 13 and Annex 1C - Competent supervisory authority

Ireland Data Protection Commission (DPC) (An Coimisiún um Chosaint Sonrai)

Annex II

The descriptions of technical and organizational measures applied to Personal Data can be found in Appendix 2 to this Addendum.

2. Information required for the UK Approved Addendum

In accordance with section 17 of the UK Approved Addendum, the Parties agree that when the UK Approved Addendum is applicable, the format and the content of the UK Approved Addendum shall be amended and replaced with the table below.

Table reference in the UK Approved Addendum

Section

Information to complete the table

Table 1: Parties

Start Date

Is the start date of this Data Processing and Security Addendum.

Table 1: Parties

Parties’ details

Data exporter(s): 

Name and address: Hopper UK Inc. Ltd; 58-60 Kensington Church St., Kensington, London W8 4DB, UK

Contact person’s name, position and contact details: Adriana Sokólska, Data Protection Officer, legal@hopper.com

Activities relevant to the data transferred under these Clauses: See Appendix 1

Signature and date:  Signature and date can be found in the signatory page of the Agreement.

Role (controller/processor): Controllers

and

Name: as set forth in the Agreement

Address: as set forth in the Agreement

Contact person’s name, position and contact details: as set forth in the Agreement

Activities relevant to the data transferred under these Clauses: See Appendix 1

Signature and date:  Signature and date can be found in the signatory page of the Agreement.

Role (controller/processor): Controller

Data importer(s): 

Name and address: Hopper UK Inc. Ltd; 58-60 Kensington Church St., Kensington, London W8 4DB, UK

Contact person’s name, position and contact details: Adriana Sokólska, Data Protection Officer, legal@hopper.com

Activities relevant to the data transferred under these Clauses: See Appendix 1

Signature and date:  Signature and date can be found in the signatory page of the Agreement.

Role (controller/processor): Controller

and

Name: as set forth in the Agreement

Address: as set forth in the Agreement

Contact person’s name, position and contact details: as set forth in the Agreement

Activities relevant to the data transferred under these Clauses: See Appendix 1

Signature and date:  Signature and date can be found in the signatory page of the Agreement.

Role (controller/processor): Controller

Table 2: Addendum EU SCCs

Addendum UE SCCs

The Parties select the following option:

“the Approved EU SCCs, including the Appendix Information and with only the following modules, clauses or optional provisions of the Approved EU SCCs brought into effect for the purposes of this Addendum”

The terms used in the paragraph above have the same meaning as in the UK Approved Addendum and details of “Appendix Information”, “clauses” and “optional provisions” are set out in Section 4(a) of this Data Processing and Security Addendum and Appendix 1 attached thereto.

Table 3: Appendix Information

Annex 1A- List of Parties

Name, address and contact person’s name, position and contact details can be found in this Appendix 3, Section B.

Activities relevant to the data transferred under these clauses and the role can be found in Appendix 1 and 3 to this  Data Processing and Security Addendum.

Signature and date can be found in the signatory page of the Agreement.

Table 3: Appendix Information

Annex 1B - Description of the transfer

Description of the transfer can be found in Appendix 1 to this  Data Processing and Security Addendum.

To the extent applicable, the descriptions of safeguards applied to special categories of Personal Data can be found in the security measures referenced for satisfying the completion of Annex II of the standard contractual clauses (see below).

Table 3: Appendix Information

Annex II - Technical and organisational measures including technical and organisational measures to ensure the security of the data

The description of technical and organisational measures applied to Personal Data is set out in Appendix 2 to this  Data Processing and Security Addendum.

Table 3: Appendix Information

Annex III: List of Sub processors

Not applicable.

Table 4: Ending this Addendum

Ending this Addendum when the UK Approved Addendum Changes 

The Parties select that both exporter and importer may end the UK Approved Addendum as it is incorporated into this Data Processing and Security Addendum as set out in section 19 of the UK Approved Addendum.

Version: 1.0